Department Equipment List
| Make | Model | Description | Capacity |
|---|---|---|---|
| Baileigh | SW-84 | Hydraulic Ironworker | 84 Ton |
| Wellsaw | 1016 | Horizontal bandsaw | |
| Miller | Millermatic 210 | MIG Welder - 160 Amp | 160 Amp |
| Miller | Syncrowave 250DX | TIG Welder - 310 Amp | 310 Amp |
| Victor | 100C | Oxy-acetylene welding/cutting outfit | |
| Grieve | BF-8128 | Heat treat oven | |
| Niagara | No. 44 | Power shear | 4 Ft |
| DeWalt | NL | Aluminum extrusion circular saw - 12" | 12" |
| Kalamazoo | FHC350SA | Cold cutting circular saw - 12" | 12" |
| National | U6 7212 | Box & pan brake | 6 Ft |
| Verson | 2062 | Press brake - 6' | |
| SSC | 5860-T2:78 | Panel saw | 4 Ft x 8 Ft |
| Delta | 34-802 | Unisaw table saw - 10" | 10" |
| Avey | No. 2 | Drill press - 26" | 26" |
| Bradwell | NL | Large hydraulic press - H-frame | |
| Hannifin | NL | 10 Ton hydraulic press - C-frame | 10 Ton |
| Dake | 907002 | 50 Ton air/hydraulic H-frame press | |
| MSC | NL | 20" Drill press | 20" |
| Kalamazoo | S4S | 6" Belt sander | 6" |
| Wissota | E-8WL | 8" Pedestal Grinder - 3/4 HP | 8" |
| DeWalt | D28715 | 12" Abrasive cut-off saw | 12" |
| Gesswein | DCE Unimaster | Dust collector |
-
Metal Fabrication Dept.
-
Metal Fabrication Dept.
-
Metal Fabrication Dept.
-
Metal Fabrication Dept.
-
Baileigh Hydraulic Ironworker
-
TIG Welder, Heat Treat Furnace, & Sand Blaster
